RESINGUM 1/1 BIS ISOLRESINE waterproofing coating system

Description

RESINGUM is a composite system for the protection of concrete structures certified according to the UNI EN 1504-2 standard. It is made of solvent-free, water-based acrylonitrile-polyurethane resins with a specific weight of glass fiber interlayer and is designed to be left exposed.

USES

It is applied on terraces, roof terraces and external walls, usable on horizontal, vertical and oblique external surfaces in order to make them waterproof.

SUPPORTS

Application to floors can be performed without demolishing the existing substrate and on materials such as stoneware, marble chip bricks, ceramic, concrete, sheathing, and corrugated sheet metal. It is recommended to prepare the substrates as indicated in the product data sheet.

HOW TO USE

Substrate preparation;

Preparation of the primer (Resingum 1 plus water in a 1:4 ratio) and its application using a roller and/or brush;

Laying down a layer of fiberglass fabric;

Impregnation of the fabric by applying a layer of Resingum 1, using a roller and/or brush;

Finishing, by applying two layers of Resingum 1 BIS using a roller and/or brush, with a drying period of approximately 12 hours between each layer (RH 50±5%).

PACKAGING

Resingum 1 buckets of 4 and 14 litres; Resingum 1 BIS 4 and 14 liter buckets; MATT300 fiberglass fabric rolls.

CONSUMPTION PER SQUARE METER

RESINGUM 1: 0.5 kg/m2 (0.70 l/m2)

RESINGUM 1 BIS: 0.7 kg/m2 (0.47 l/m2)

MATT 300 FIBERGLASS FABRIC: 300 gr/1.00 m2

TECHNICAL CHARACTERISTICS

EN 1504-2 Coating (C) according to PI, MC and IR principles

SAFETY INSTRUCTIONS

For complete information on the safety of system components and their correct use, please refer to the relevant Safety Data Sheets. During installation, wear gloves, protective glasses, masks, and safety shoes, in addition to all other safety standards required for handling chemical products. In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical attention.